Mazda CX-3 Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
221 Posts
Discussion Starter #1
Was after some guide on the removal of the steering column covers.

Removed the 2 screws from below and the cover separates easily.

Top cover lifts up and is just connected by the vinyl trim that covers things when your using telescopic wheel etc.

Bottom over seems to be held in place by a multi part clip in middle.

Any clues on how to disengage that clip without damaging things would be appreciated.
 

·
Registered
Joined
·
221 Posts
Discussion Starter #2
I found this reference from CX5 forum to instructions - but can't find the referenced info

"2. Remove the upper column cover according to the MS3 online instructions or the Workshop Manual (section 09-17 COLUMN COVER REMOVAL/INSTALLATION)."
 

·
Registered
Joined
·
221 Posts
Discussion Starter #3 (Edited)
Found it in 2016 CX5 docs

Looks like you slide the part forward to release
 

·
Super Moderator
Joined
·
2,078 Posts
Here is the CX-3 version for your file. I was at work when you first requested the file!
 

Attachments

·
Registered
Joined
·
221 Posts
Discussion Starter #5
Here is the CX-3 version for your file. I was at work when you first requested the file!
Thanks Anchorman

I am actually temped to pay the $19.90 US to get 24 hours access to the US service site and have a look at the full service manual to see if its worth buying in total.
 

·
Super Moderator
Joined
·
2,078 Posts
You can do a lot in an hour and as long as you don't log out, you will get much more.
 
1 - 6 of 6 Posts
Top