Mazda CX-3 Forum banner

Rims width

1985 Views 2 Replies 2 Participants Last post by  Jorge84
Hello. Im looking at upgrading rims and tyres.
I come across the wheels that id like to put on but I have no idea how wide I can go. There 18×9.5 or 18×9... attached is an image of the wheels i want to put on...
Any information would be appreciated. Thanks

Attachments

See less See more
2
1 - 3 of 3 Posts
The OEM's are 7" wide. Going another 2" to 2 1/2" in width might be a little much.
The are a couple of ways to be sure, ask a tire and wheel supplier if they recommend that size, or try one on the front and see if it clears everything.
Did you look at the sticky at the top of this sub-forum for the tire sizes that fit the CX-3?
The OEM's are 7" wide. Going another 2" to 2 1/2" in width might be a little much.
The are a couple of ways to be sure, ask a tire and wheel supplier if they recommend that size, or try one on the front and see if it clears everything.
Did you look at the sticky at the top of this sub-forum for the tire sizes that fit the CX-3?
Thanks for the info.
Iv been told by tire specialists that a 18×8.75 will fit, so i figured that a 18×9 should fit aswell with a slightly streched tyre...
In the photo's I attached the wheels seem to be 18×9 or 18×9.5...
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top