Mazda CX-3 Forum banner

1 - 20 of 21 Posts

·
Registered
Joined
·
237 Posts
Discussion Starter #1
Could someone please tell me the part number for the round centre aircon vent?

Also, does anyone have the link to where you can download the entire parts/ workshop manual? Cheers.
 

·
Super Moderator
Joined
·
2,078 Posts
Can tell you when I get to my computer.
 

·
Super Moderator
Joined
·
2,078 Posts
The part No is

D09W-64-730 01 for the black surround

D10C-64-730 15 for the Black/red

D10S-64-730 0B for the black and chrome

The website I use is https://portal.mazdaeur.com/ but you have to register and you have to pay for access.
 

·
Registered
Joined
·
237 Posts
Discussion Starter #4
Thanks for that. Just to confirm that is for the entire vent including louvres and the coloured fascia rings?
 

·
Super Moderator
Joined
·
2,078 Posts
Yes, I can show you the diagram if you want but it is a faff as I have to take it off my old windows computer and transfer it to an apple device. That reminds me, you can only view the Mazda portal on a windows computer.
 

·
Super Moderator
Joined
·
2,078 Posts
You need a new one?

I took a photo of the screen rather than print screen etc.........

 

·
Registered
Joined
·
237 Posts
Discussion Starter #8
Great thanks. I'll look into a subscription too. Yes after a new one. They are 160 Aud second hand in Japan. Just waiting on a new price now.
 

·
Registered
Joined
·
272 Posts
did yours break or something? just curious, they feel somewhat plastic-y and fragile so I never fiddle with them too much
 

·
Registered
Joined
·
237 Posts
Discussion Starter #10
No they're perfectly fine, I just need it as a replacement for my gauge which I've installed in the vent when at the stealer ship.
 

·
Registered
Joined
·
237 Posts
Discussion Starter #11
Hi Anchorman, i tried to register to use the portal though as it's a Euro portal, Australia is not accepted to access it.

I'm looking for any information you can supply about the common rail diesel plug, as I need to get the part number for my diesel chip guy.

I was wondering if you can please supply a picture that shows the plug going into the loom, with the part number for both female and male sides? The plug on the wiring loom side has a number 150123 on it.

Here's the pics and some further pics in my rides thread;

http://www.cx3forum.com/forum/mazda-cx3-owners-check-area/5322-hi-brisbane-australia-4.html

Thanks in advance!
 

Attachments

·
Super Moderator
Joined
·
2,078 Posts
I'll have a look but I almost certainly can't as the looms will come complete.
 

·
Super Moderator
Joined
·
2,078 Posts
As I suspected, they only supply the complete engine loom (showing as 625GBP). I’m sure they will be available but you would be looking at a specialist.

 

·
Registered
Joined
·
237 Posts
Discussion Starter #15
Thanks for looking into that. The seller is saying there were two types of plugs for the common rail diesel.

nik007, can you please post a photo of your plug so that I can compare?

Anchorman - For your CX-5, would you mind please posting the plug's male and female side for a comparison too?
 

·
Super Moderator
Joined
·
2,078 Posts
Its different;



This is the fuel rail number;



I’d be inclined to go to a breaker or even look at alternative small japanese vehicles with a Denso rail that have been broken. If you could snip the plug you don’t need to worry about getting the pins for the plug either.
 

·
Super Moderator
Joined
·
2,078 Posts

·
Registered
Joined
·
237 Posts
Discussion Starter #18
Thanks. unfortunately the number is smudged quite a bit on my CX-3 from factory. Your plug for the CX-5 is exactly the type they sent me for the tuning chip.

It's hard to make out - it seems to be 1514101439. Any ideas?
 

·
Super Moderator
Joined
·
2,078 Posts
1 - 20 of 21 Posts
Top