Mazda CX-3 Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
34 Posts
Replacing the stock LED foglight bulb or installing a fog light assembly on a car that didn't have them from the factory? You're not likely to find an aftermarket part that will fit in the stock location. Could maybe rig up some rally style lights like the MINI Coopers and Ford Mustangs use on the grille or bumper area (air inlet area for the radiator, I'm thinking), but you'll ideally want them mounted as close to the corners of the car as you can get them for them to be effective fog lights. If it's just an appearance thing, then you can put them wherever.

Anyone have any idea how hard it would be to install the factory fog lights into a car that wasn't originally equipped with them? Not sure if the factory fog light switch is on the turn signal stalk with the other lights or if it's a push-button on the dash. This is the first car I've had in a while that doesn't have fog lights and I kinda miss having them.
Anyone with experience....

What is the difference, why new stalk included in one ste, do we need it or programming?

I believe there will be stock cables fited till light location.. page 8 of attachment.


US $240 | LED Fog Lights Lamp Kit for Mazda CX-3 cx 3 Without Auto 2016 2017 2018 2019
https://s.click.aliexpress.com/e/Dq6PFXMG

US $121.60 5%OFF | CX-3 fog light,car accessories,LED,cx-3 daytime light,CX3,CX 3,Tribute,RX-7,RX-8,Protege,MX-3,Miata,CX-5,Navajo,CX-3 headlight
https://s.click.aliexpress.com/e/N1YHRxYy

https://cloud.tapatalk.com/s/5d955643ea412/bumper front.pdf
 

·
Registered
Joined
·
34 Posts
Oh! Somewhere I have firsthand experience!!!!!

I installed mine for less than $200 USD DIY, with aftermarket foglights in factory style housings, and a factory switch and relay.

I have auto headlights and paid $50 for part number TK51-66-122A for a new stalk. The stalk is SUPER easy to install and I can provide more details if you'd like.
The relay is part #D09W-67-730 and cost $16.
The lights I got are from a company called "Winjet". They're available on Amazon for about $91. Part # is WJ30-0601C-09. They're the only ones I found that have OEM style connectors on them. They come with an aftermarket generic harness but will still connect to the OEM wiring that is ALREADY INSTALLED!!! The wires are clipped to the inside of the bumper cover.

The install was easy on the driver's side but a bit of a PITA on the passenger side because the bottom of one of the tanks (I think coolant) is right behind where the light goes. If you have a small 90 degree ratcheting screwdriver it'll make your life much easier.

I had everything done in about an hour and they look stock. They definitely light up the sides of the road a little better, and they look bad ass. Will provide pictures shortly. NOTE: There is a down side - they do cause some interference with the FM radio. Haven't figured out a way around that yet but I've got some ferrite beads on order to try.



Thanks... exactly on my questions...

Wiring exist as per my attachment.
Need stalker, no need programming.

Bad news this is the expensive kit. Thanks for links and prices. In Europe are bit higher...


For the smartass guys... decorative covers has a tendency to break and are hard to find... mine are broken with missing parts...

Sent from my SM-G950F using Tapatalk
 

·
Registered
Joined
·
34 Posts
Hi,

Have few questions to those that already got one of the two type of sets.

OEM style set with Stalk WITHOUT AUTO
1) Does Auto day running lights works?
2) Does Auto (low light) night lights work?

Alternative style with wiring harness and no stalk
1) Can you upload connection instruction received with kit?
2) Is it possible to connect in such a way, so fog lights not activate when auto day/night running lights start? And get activated only by shifting stalk from auto to low beams.
 
1 - 3 of 3 Posts
Top